| Walxaha | Awoodda |
| kala soocidda guddiga | Saldhig Aluminium, Copper Saldhig, Saldhig birta, dhoobada saldhig naxaas ah, loox Bade la isku daray |
| maaddo | Gudaha Aluminium, naxaasta guriga, aluminium limported, naxaas la dhoofiyay |
| daaweynta dusha | HASL/ENIG/OSP/lacag |
| xisaabta lakabka | Loox daabacan oo hal dhinac ah/laba dhinac ah oo daabacan |
| maxi. sabuuradda cabbirka | 1200mm*480mm |
| min. looxa Cabirka | 5mm*5mm |
| balladhka raadraaca / apsce | 0.1mm/0.1mm |
| duuduubo oo qalloociso | <=0.5%( dhumucdiisuna:1.6mm,Board Cabirka: 300mm*300mm) |
| dhumucda looxa | 0.5mm-5.0mm |
| dhumucdiisuna waxay tahay naxaas | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| Dulqaadashada shahaadada V-CUT | Jidka CNC: ± 0.1mm; feer: ± 0.1mm |
| Diiwaangelinta V-CUT | ±0.1mm |
| Dhumucdiisuna waxay tahay derbi dalool | 20um-35um |
| Min diiwaangelinta booska godka (la soco xogta CAD) | ±3mil(±0.076mm) |
| Min. dalool feeray | 1.0mm ka hooseeya, 1.0mm (miisaanka guddiga Ka hooseeya 1.0mm,1.0mm) |
| Min. feeray Afyare square | 1.0mm ka hooseeya, 1.0mm * 1.0mm ( Dhumucdiisuna waxay ka hooseysaa 1.0mm, 1.0mm*1.0mm) |
| Diiwaangelinta wareegga daabacan | ± 0.076mm |
| Dhexroor dalool Min | 0.6mm |
dhumucda daaweynta dusha | Dahab dahab ah: Ni 4um-6um, Au0.1um-0.5um ENIG: Ni 5um-6um, Au:0.0254um-0.127um qalinjabinta: Ag3um-8um HASL:40um-100um |
| Dulqaadashada heerka V-CUT | ±5 (Degree) |
| guddiga V-CUT dhumucdiisuna | 0.6mm-4.0mm |
| Min. Lefend ballaca | 0.15mm |
| Min. Furitaanka maaskarada | 0.35mm |